- How to generate the pick and place detail file on cam350 how to#
- How to generate the pick and place detail file on cam350 software#
A drill chart describes the number of holes in the board, the different sizes of the holes, and whether they are plated or non-plated. There is also one more thing we need to mention in the fab drawing which is the drill chart. The pad tolerances should be mentioned as well. Next, there are pads on the board – plated through-hole pads and non-plated through-hole pads. Details include the IPC class for the board material, the number of layers in the board, solder mask color, etc. In the fab details, you can point out all the required specifications and information about the board. Fab detailsįab details are written on the fab layer. We need to fill all this information over here in the fab drawing again. We get all this information from the stack-up report as we saw in the last tutorial. The board details such as the total dimensions of the board, the thickness of the board, the tolerance of the board, etc., can also be mentioned. The stack-up drawing should contain all the details related to the stack-up such as the thickness of each layer and the thickness of the top and bottom solder mask. You need to draw the stack-up in your fab layer using the add graphics tool and mark all the details in the stack-up using the Text tool. Once all dimensions have been marked, the layout of your board in the fab drawing is complete. Check if the orientation of your connectors and all components are as per the datasheet. Now click on that and then click on the mounting hole on the other side and pull the dimension down. Move your cursor to the center of the mounting hole, a circle appears when it is at the centre of the hole. To mark, select the add dimension icon and select the fab layer. Also, the dimensions from the mounting hole to the board edge. We need to mark the dimensions of the board and then we need to mark the dimensions from one mounting hole to another. To import the file:īrowse and select your DXF file from the popup window, and set the dimensions of the logo in the import scale option. You can use that as the logo for your board.
How to generate the pick and place detail file on cam350 software#
If you don’t have a DXF file then you can use an image of your logo, and you can find online software that converts your image into a DXF file. Now to place the logo of your company you will require a DXF file of the logo. Add the text in the popup window and set the dimensions of the text as per your requirements.Select the silkscreen layer and select text icon > click wherever you need to add the text.You may need to add text on your board, such as the company name. In the same way, you can do the page setting in your schematic as well. Whatever you type in this window will appear on the right bottom corner. in the title block at the right bottom corner. To do that follow these steps:
We have to add the details such as the name of the board, part number and required comments, etc.
How to generate the pick and place detail file on cam350 how to#
Now let’s check how to write the details in these sections before generating the gerber. Also, there should be several other pieces of information in the fabrication drawing, which are marked in the image below: Now check whether you have placed all components required for manufacturing as per your design requirements. Once these are done the layout checks are complete. Later, check the schematic values, whether the components are placed correctly and the quality markings are correct in the circuit. the footprint, the component values, etc., should match the manufacturer’s part number. You need to confirm whether the bill of materials (BOM) which you have created is as per your schematic. There are three types of checklists you need to go through before generating your production files – BOM, schematic, and layout.